Skip to main content

Which VMS are compatible with VMS Gateway 8.3?

This article outlines, in testing, how compatible VMS Gateway is with these leading VMS providers

Updated over 3 weeks ago

VMS Gateway has been tested using the official ONVIF tests and passes all tests for an ONVIF Profile S Device. This should provide broad compatibility with approved ONVIF Profile S Clients.

We have tested the following third-party systems for compatibility with VMS Gateway.

Test Results

Tested VMS Gateway Version: 8.2

Third-party VMS

Notes

Avigilon Control Centre
Version 7.14.22.2

  • All tests passed

Dallmeier
Version 9.11.13

  • All available tests passed
    (except alarm receiving)

(Verified using a VideoNetBox III)

Genetec Security Center
Version 5.11.3.0

Genetec has native support for EdgeVis and it is recommended to use that capability instead of utilising VMS Gateway.

Note: ONVIF PTZ is not currently supported, only serial PTZ with specialist encoders. Please use VMS Gateway if ONVIF PTZ is required.

  • All tests passed

i-Pro Video Insight
Version 7.9.5.248

  • All tests passed

Milestone XProtect
Version 23.2a

Milestone has native support for EdgeVis and it is recommended to use that capability instead of utilising VMS Gateway.

  • Auto-discovery (Express) does not work - use Manual and enter IP address of virtual ONVIF devices

  • Milestone uses a PTZ preset scheme that is currently incompatible for settings PTZ Presets with VMS Gateway

  • Previously discovered virtual ONVIF devices can sometimes fail to be rediscovered by Milestone

ONVIF Device Manager
Version 2.2.250

  • All tests passed

Tests Performed

  • Automatic and manual discovery of VMS Gateway within the VMS

  • Using the high-quality preset, the video and audio will play consistently and without latency buildup for 5 days.

  • Check PTZ (Pan, Tilt, Zoom) controls operate as expected:

    • Can a user perform regular camera pan, tilt and zoom

    • Can a user set a PTZ preset

    • Can a user go to a PTZ preset

    • Prompt feedback in received video to PTZ movement

  • Can receive an EdgeVis SZ-2D alert through Profile S


​

Did this answer your question?