VMS Gateway has been tested using the official ONVIF tests and passes all tests for an ONVIF Profile S Device. This should provide broad compatibility with approved ONVIF Profile S Clients.

We have tested the following third-party systems for compatibility with VMS Gateway.

Test Results

Tested VMS Gateway Version: 8.2

	Third-party VMS	Notes
	Avigilon Control Centre Version 7.14.22.2	All tests passed
	Dallmeier Version 9.11.13	All available tests passed (except alarm receiving) (Verified using a VideoNetBox III)
	Genetec Security Center Version 5.11.3.0	Genetec has native support for EdgeVis and it is recommended to use that capability instead of utilising VMS Gateway. All tests passed
	i-Pro Video Insight Version 7.9.5.248	All tests passed
	Milestone XProtect Version 23.2a	Milestone has native support for EdgeVis and it is recommended to use that capability instead of utilising VMS Gateway. Auto-discovery (Express) does not work - use Manual and enter IP address of virtual ONVIF devices Milestone uses a PTZ preset scheme that is currently incompatible for settings PTZ Presets with VMS Gateway Previously discovered virtual ONVIF devices can sometimes fail to be rediscovered by Milestone
	ONVIF Device Manager Version 2.2.250	All tests passed

Tests Performed

Automatic and manual discovery of VMS Gateway within the VMS
Using the high-quality preset, the video and audio will play consistently and without latency buildup for 5 days.
Check PTZ (Pan, Tilt, Zoom) controls operate as expected:
- Can a user perform regular camera pan, tilt and zoom
- Can a user set a PTZ preset
- Can a user go to a PTZ preset
- Prompt feedback in received video to PTZ movement
Can receive an EdgeVis SZ-2D alert through Profile S

Where next?