Skip to main content
All CollectionsEdgeVis ServerEdgeVis Server FAQs
What are the EdgeVis Server firewall ports and networking requirements?
What are the EdgeVis Server firewall ports and networking requirements?
Updated over 2 months ago

Networking Requirements

  • A static IP address - both on the internal local network and an external IP address (that your Internet-connected encoders/viewers will use to connect).

  • An internet connection that can support the combined bandwidth needs of the encoders and viewers.

  • An accurate synchronized system clock (Windows will do this automatically; Linux may require an NTP client).

Firewall ports

You will have to open these ports on both your server machine and on your internet router/firewall.

You will also have to forward these ports from your internet router onto your server machine:

  • Port 9300 (UDP) - Encoder communication

  • Port 9300 (TCP) – Viewer connection channel (unencrypted)

  • Port 9301 (TCP) – Viewer connection channel (encrypted)

  • Ports 2048 (UDP) – Viewer Video / Full-res / Recording Download channel

  • Port 9443 (TCP) - Standard SSL Server Web Management Interface

If you have a server cluster you must make sure the following ports are opened on your EdgeVis Server machines (but NOT to the internet) - each machine in your cluster must be able to talk to each other on these ports without port forwarding:

  • Port 1527 (TCP)

  • Port 47100 (TCP)

  • Port 47500 (TCP)

  • Port 9443 (TCP)

Did this answer your question?