Skip to main content
About 4K-R800
Updated over 5 months ago

The 4K-R800 is a ruggedised surveillance solution combining 4K,HD and SD recording and HD real-time streaming of video, audio and data over a variety of networks (such as cellular, radio and Wi-Fi) with integrated alarm and cueing functionality.

Picture of 4K-R800

4K-R800 is an integrated, resilient and ready to deploy remote surveillance solution that combines dual channel video and audio streaming (both HD and SD) with a built-in 4K, HD and SD recorder. Live streaming can be triggered by a range of intelligent or simple alarms, with multiple operators able to access the live output simultaneously on fixed (e.g. PC) and mobile (e.g. smart phone) platforms.

EdgeVis ensures a more efficient representation of detail at lower bandwidths, particularly where motion levels are high, as well as exceptionally low latency in the remote control of cameras. Error resilience is also particularly high, since the EdgeVis video codec is highly tolerant of packet loss.

The 4K-R800 supports retrieval of 4K high-resolution images, both live and DVR stored, providing access to frames of particular interest. With secure AES-256 encryption, a ruggedised IP68 compact form factor, and low power consumption (19W down to 144mW in sleep mode) and the flexibility to operate over 4G/LTE, satellite and Wi-Fi networks, as well as tactical IP radios the 4K-R800 can be rapidly deployed.

Key features

  • Complete remote audio/video/data streaming and storage solution for use in harsh environments

  • Supports new ‘Dual Stream’ capability to transmit two independent video streams from any attached camera

  • Secure live video and audio transmission in locations with very low bandwidth (supports 9Kbps to 2Mbps)

  • Built-in wireless transmission modules (cellular, Wi-Fi), on board DVR and optional GPS input

  • Ruggedised IP68 rated enclosure with no moving parts

  • Rapidly deployable (in minutes) for operational situations where installation time is critical

  • Rule-based triggering of streaming transmissions to optimise battery life for extended deployments

  • Accepts video input from HDMI, 3G-SDI, PAL/NTSC, and up to 4 IP cameras – with appropriate PTZ control

The 4K-R800 datasheet can be downloaded by clicking the link below.

Did this answer your question?