DC/DC Power Convertors for your encoder | EdgeVis Help Centre

EdgeVis Help Centre

All CollectionsEdgeVis encodersWarranties, returns, accessories, end-of-life noticesAccessories

DC/DC Power Convertors for your encoder

DC/DC Power Convertors for your encoder

If your input DC Voltage doesn't match your encoder we have some suggested products you can use.

Updated over a month ago

Listed below are a range of DC:DC converters designed to power EdgeVis encoders from a DC power source, listed by encoder product.

All DC:DC listed here have a 4:1 input voltage range allowing them to run from 9-36VDC, making them suitable for most low voltage DC applications.
Generally these DC:DC converters will require custom output lead using a suitable DC connector to match to product - these are listed in the table.
Most DC:DC will also require a input fuse, refer to manufactures recommendations/application notes.

For use with HD-IP200

Product	Traco Power TMDC 40-2412 XP Power DTE4024S12
Specification	Vin 9-36VDC Vout 12VDC Power 40W Dims: 112x64x26mm
DC Connector	Kycon KLDX-PA-0202-B Same Sky PP3-002BH
Notes	DIN Rail mount versions/clips also available.
Encoder requirements	12.0VDC +/-10% 20W Min

For use with HD-IP470

Product	Cincon CHB100W-24S15-CM
Specification	Vin 9-36VDC Vout 15VDC Power 100W Dims: 110x55x26mm
DC Connector	Amphenol 20020003-G031B01L
Notes	DIN Rail versions avilable. HD-IP470 as a wide input voltage range so an external DC:DC might not be required.
Encoder requirements	9-36V 60W Min 90W Typ

For use with EVVR-1RL

Product	Traco Power TMDC 40-2412 XP Power DTE4024S12
Specification	Vin 9-36VDC Vout 12VDC Power 40W Dims: 112x64x26mm
DC Connector	Same Sky PP3-002BH
Notes	DIN Rail mount versions/clips also available
Encoder requirements	12-19VDC 30W (Min)

For use with EVVR-4RL

Product	Cincon CHB100W-24S15-CM
Specification	Vin 9-36VDC Vout 15VDC Power 100W Dims: 110x55x26mm
DC Connector	Same Sky PP3-002BH
Notes	DIN Rail versions available
Encoder requirements	12-19VDC 75W (Min) 100W (Typ)

For use with EVVR1

Product	Traco Power TMDC 40-2412 XP Power DTE4024S12
Specification	Vin 9-36VDC Vout 12VDC Power 40W Dims: 112x64x26mm
DC Connector	Same Sky PP3-002BH
Notes	DIN Rail mount versions/clips also available
Encoder requirements	12-24VDC 30W Min

For use with EVVR4

Product	Cincon CHB100W-24S15-CM
Specification	Vin 9-36VDC Vout 15VDC Power 100W Dims: 110x55x26mm
DC Connector	Same Sky PP3-002BH
Notes	DIN Rail versions available
Encoder requirements	12-24VDC 75W (Min) 100W (Typ)