There are several additional configuration options available on the encoder’s home page:
Power Settings (HD-IP250 Only)
It is possible to adjust two power options on the HD-IP250
PoE Power – disable PoE power output on the camera port
Fan Power – to reduce the noise made by the encoder it is possible to disable the fan. This will reduce the maximum supported temperature of the HD-IP250 by 10°C (18°F)
Power Settings (4K-R800 Only)
The 4K-R800 is able is able to provide power to a number of external devices:
Wired cameras (both 3G-SDI and HDMI ports) – this interface provides the ability to always power the camera, or to only power it when required (i.e. during recording or viewing).
Relay outputs – the encoder has a number of relay outputs that can be opened/closed that will allow the incoming power (up to 2 amps) to pass through.
Ground sensor – if the appropriate cable is available the encoder can provide power for the ground sensor serial port.
